Authorized dealer · Certified installers · Charlotte, NC headquarters
360 Technology Group is an authorized Radionix (formerly Bosch) dealer and certified installer
We have been selling, installing, programming and servicing Radionix (formerly Bosch) systems across North and South Carolina since 2018 — more than 8 years. Our scope covers Radionix B Series and G Series control panels, RADION wireless devices, Conettix communications and monitoring, AMS access management software and AMC2 door controllers.
Bosch intrusion and access control is now Radionix, part of Keenfinity Group. We have installed this range in the Carolinas since 2018 — under the Bosch name then, Radionix now — and we service both the legacy Bosch equipment already in your building and current Radionix product.
- Authorized Radionix (formerly Bosch) dealer — we quote and supply genuine Radionix (formerly Bosch) equipment, licensing and subscriptions.
- Certified Radionix (formerly Bosch) installers — our technicians install, wire, program, commission and document the system.
- Repair and takeover — we service, troubleshoot, expand and take over existing Radionix (formerly Bosch) installations we did not originally install.
- 24/7 emergency service — on-call service technicians for emergency repairs, plus scheduled preventive maintenance.
We cover every city in North Carolina and South Carolina from our Charlotte headquarters. Request a quote or service call Call 704-726-4254
Radionix (formerly Bosch) equipment we supply and install
Bosch intrusion and access control is now Radionix, part of Keenfinity Group, with the product rebrand effective 1 January 2026. B Series and G Series panels, RADION wireless, Conettix communications, AMS and AMC2 are the same products under a new name. We install, program, take over and service all of it across North and South Carolina.
B9512G Control Panel
The large commercial panel: up to 599 points, 32 areas, 32 doors and 2,000 users. For multi-tenant buildings, campuses and anywhere intrusion, access and fire annunciation share one system.
B8512G Control Panel
Up to 99 points, 8 areas, 8 doors and 500 users. The right size for most single-building commercial sites — and the usual answer when a B9512G is being over-specified.
B5512 Control Panel
Smaller commercial panel for straightforward sites: a storefront, a clinic, a small office with a handful of zones.
B942 Touch Screen Keypad
Touchscreen keypad for the main entrance. Worth the cost where staff turnover is high, because a clear interface is what stops accidental alarms.
B426 Conettix Ethernet Module
IP communications to the monitoring centre. Pair it with a cellular path — a single communications route is a single point of failure.
B450 Conettix Communicator
Plug-in communicator interface for cellular and dual-path reporting, which is what keeps signals flowing when the internet drops.
AMC2 Access Modular Controller
The access controller behind the doors, with I/O expansion boards, OSDP readers and DESFire credential support.
Access Management System (AMS)
The access administration software. Version, license scope and server or database architecture need deciding before procurement, not after.
Deeper guides: B Series and G Series panels, RADION wireless, detection and Conettix, AMS downloads, versions and licensing, AMC2 wiring, firmware and readers and AMS, BVMS, BIS and intrusion integration. The video side of the same former-Bosch portfolio is now IQSIGHT.
Product images are supplied by the manufacturer. 360 Technology Group is an authorized Radionix (formerly Bosch) dealer and certified installer. Models, finishes and availability change — the proposal names the exact part numbers for your project.
North Carolina and South Carolina planning guide
Bosch Burglar Alarm Security
Selecting Bosch Burglar Alarm Security is an architecture decision as much as a purchasing decision. A complete scope explains what is being solved, what must integrate, how failure is handled and who owns the system after handoff.
Start with the decision, not the catalog
360 Technology Group evaluates Bosch Burglar Alarm Security as part of a complete intrusion-detection, notification and response system. The recommendation should follow a field-verified problem statement, not a presumption that every published feature belongs in the project.
Discovery documents the current equipment, affected users, desired workflows, required integrations, security and privacy expectations, project constraints and measurable acceptance criteria. That evidence creates a fair basis for comparing reuse, migration and replacement.
For Carolina facilities, the scope should also account for occupied work areas, weather exposure, lightning and surge conditions, local construction coordination, network readiness, service access and the owner’s long-term administration model.
Detailed product and planning guides
Each card below opens a published guide with deeper product-family, design or implementation information.
Bosch B Series and G Series Intrusion Panels
Open the detailed product, design or implementation guide.
Bosch RADION, Detection, Conettix and Monitoring
Open the detailed product, design or implementation guide.
Capabilities and selection checkpoints
The cards in this section summarize information to evaluate; they are not separate pages. Availability and compatibility can change, so final models and releases must be confirmed against current manufacturer resources.
Intrusion Alarm Systems
Confirm which current models, editions, licenses and dependencies support this requirement before procurement.
Detection strategy
Connect this capability to a named user workflow and a testable result at the actual facility.
Partition workflow
Confirm which current models, editions, licenses and dependencies support this requirement before procurement.
Communication path
Connect this capability to a named user workflow and a testable result at the actual facility.
Verification
Connect this capability to a named user workflow and a testable result at the actual facility.
False-alarm control
Confirm which current models, editions, licenses and dependencies support this requirement before procurement.
Acceptance test
Review compatibility, capacity, infrastructure and lifecycle implications with the complete system design.
Evidence to collect before design
A useful survey and stakeholder review should produce the following project evidence for Bosch Burglar Alarm Security:
- Protected areas, operating hours, threat scenarios, environmental conditions and required response.
- Panel capacity, detection zones, keypads, panic devices, sounders, tamper and supervisory points.
- Communicator paths, signal quality, monitoring requirements, contacts and verification procedures.
- Access-control, video-verification, intercom and building-system integration boundaries.
- Arming authority, partitions, duress, false-alarm controls, event retention and training needs.
- Standby power, communication failure, test schedule, documentation and ongoing service responsibility.
Architecture and integration review
Detection strategy
Choose sensors from the protected space, activity and environmental conditions.
Partition workflow
Align arming areas, schedules and permissions with how occupants actually use the facility.
Communication path
Validate primary and backup reporting methods, monitoring and loss-of-path supervision.
Verification
Connect alarm events to cameras, users and procedures that support a timely, informed response.
False-alarm control
Use training, entry delay, maintenance and clear authority to reduce avoidable dispatches.
Acceptance test
Exercise every zone, notification, failure condition and monitoring response before handoff.
Compare proposals on the same evidence
Product names and device counts do not make competing proposals equivalent. Ask each bidder to identify assumptions, exclusions, supported versions, owner responsibilities and the proof that will be delivered at acceptance.
| Comparison area | Evidence a complete proposal should provide |
|---|---|
| Fit for the operating need | A written explanation of how Bosch Burglar Alarm Security supports the required users, events and workflows. |
| Compatibility | A supported-parts, software, license and integration matrix tied to the proposed architecture. |
| Infrastructure | Documented power, network, pathways, environmental and owner-furnished dependencies. |
| Acceptance | Named tests, expected results, exception handling and responsibility for correcting deficiencies. |
| Lifecycle | Current support status, update approach, warranty, subscriptions, spares and replacement planning. |
Deployment and acceptance sequence
- Discovery: agree on users, operating outcomes, retained systems, constraints and acceptance criteria.
- Field validation: verify dimensions, infrastructure, environmental conditions, pathways, power, network and integration points.
- Documented design: name the architecture, supported components, licenses, responsibilities, assumptions and change process.
- Staging and implementation: prepare configuration, backups, labels and test scripts before controlled field deployment.
- Operational acceptance: exercise normal use, exceptions, outages and recovery; then deliver training and system records.
Software, firmware and lifecycle responsibility
Record the installed model, hardware revision, software or firmware release, license or subscription, warranty and administrator ownership at handoff. Those details make later troubleshooting and upgrade planning materially safer.
Downloads, release notes, advisories and manuals should come from the manufacturer’s official portal. 360 Technology Group links to official resources and does not host firmware files locally. Some portals require an authorized customer, dealer or support entitlement.
Before any update, confirm the exact model and region, prerequisites, supported intermediate releases, backup, maintenance window, integration compatibility, rollback limits and post-update test plan. Cloud-managed products may control release timing differently from locally managed systems.
Build a project-specific comparison
Share the facility type, Carolina location, existing platform, approximate device count, operating problem, required integrations and target schedule. 360 Technology Group can use that context to determine whether Bosch Burglar Alarm Security deserves a detailed site and design review.
Bosch and Keenfinity enterprise-security resources
Use these enterprise guides to connect Bosch and Keenfinity product research with server design, access hardware, integration, cybersecurity, installation and lifecycle support in the Carolinas.
Official Bosch Intrusion software, firmware and support
Use these manufacturer-owned portals for current downloads, release notes, manuals, advisories and technical resources. 360 Technology Group links to official sources and does not copy or host firmware files.
Update carefully: confirm the exact model, region, hardware revision, installed version, prerequisites, required intermediate releases, support entitlement, integrations, backup, maintenance window, rollback limitations and post-update tests. The wrong package or sequence can interrupt service or prevent a downgrade.
Some portals require a customer, dealer, certified-technician or active-support login. Cloud-managed products may update automatically and may not offer a public firmware file.