Authorized dealer · Certified installers · Charlotte, NC headquarters
Authorized dealer and certified installers — North and South Carolina
360 Technology Group is an authorized dealer and certified installer for the manufacturers we represent, and has been installing commercial video surveillance systems across North and South Carolina since 2018 — more than 8 years.
- Authorized dealer — genuine equipment, licensing and manufacturer support entitlement.
- Certified installers — factory-trained technicians handle the cabling, mounting, power, programming and commissioning.
- Repair, service and takeover — we maintain, repair, upgrade and take over existing systems.
- 24/7 emergency service — on-call service technicians for emergency repairs, plus scheduled preventive maintenance.
We cover every city in North Carolina and South Carolina from our Charlotte headquarters. Request a quote or service call Call 704-726-4254
North Carolina and South Carolina planning guide
Video Surveillance Manufacturers and Product Guides
The right role for Video Surveillance Manufacturers and Product Guides depends on current conditions and the organization’s operating model. The sections below organize product information into questions a project team can verify, price and test.
Start with the decision, not the catalog
360 Technology Group evaluates Video Surveillance Manufacturers and Product Guides as part of a complete video-surveillance and evidence-management system. The recommendation should follow a field-verified problem statement, not a presumption that every published feature belongs in the project.
Discovery documents the current equipment, affected users, desired workflows, required integrations, security and privacy expectations, project constraints and measurable acceptance criteria. That evidence creates a fair basis for comparing reuse, migration and replacement.
For Carolina facilities, the scope should also account for occupied work areas, weather exposure, lightning and surge conditions, local construction coordination, network readiness, service access and the owner’s long-term administration model.
Capabilities and selection checkpoints
The cards in this section summarize information to evaluate; they are not separate pages. Availability and compatibility can change, so final models and releases must be confirmed against current manufacturer resources.
Video Surveillance Manufacturers and Product Guides
Compare retained equipment, migration effort, subscription impact and replacement options for this topic.
Build a video system around evidence and operations
Review compatibility, capacity, infrastructure and lifecycle implications with the complete system design.
Axis Communications
Connect this capability to a named user workflow and a testable result at the actual facility.
Hanwha Vision
Compare retained equipment, migration effort, subscription impact and replacement options for this topic.
Verkada cameras
Compare retained equipment, migration effort, subscription impact and replacement options for this topic.
Milestone Systems
Document who configures, tests, administers and supports this function after the project is accepted.
Camera installation services
Compare retained equipment, migration effort, subscription impact and replacement options for this topic.
What we review before recommending a system
Document who configures, tests, administers and supports this function after the project is accepted.
Operational purpose for every view: overview, recognition, identification or process verification.
Treat this as a design checkpoint; the final selection depends on field conditions and supported releases.
Day, night, glare, backlight, weather and environmental conditions at each scene.
Connect this capability to a named user workflow and a testable result at the actual facility.
Retention period, frame rate, resolution, bandwidth and resilient storage needs.
Review compatibility, capacity, infrastructure and lifecycle implications with the complete system design.
Video-management permissions, export workflow, audit trail and remote-access policy.
Confirm which current models, editions, licenses and dependencies support this requirement before procurement.
Evidence to collect before design
A useful survey and stakeholder review should produce the following project evidence for Video Surveillance Manufacturers and Product Guides:
- Scene objectives for every camera, including identification detail, direction of travel and operating hours.
- Day, night, backlight, glare, weather, vibration, privacy and mounting conditions at each location.
- Retention period, recording mode, resolution, frame rate, failover and export requirements.
- PoE load, switching, uplinks, bandwidth, storage, remote access and network-security constraints.
- VMS, analytics, access control, alarm, intercom and third-party integration expectations.
- User permissions, evidence handling, health monitoring, software support and replacement planning.
Architecture and integration review
Image objective
Specify the event and visual detail the camera must capture instead of selecting resolution in isolation.
Recording architecture
Calculate storage, retention, failover and export needs for the complete camera count.
Network design
Validate PoE, bandwidth, segmentation, time services, remote access and monitoring with IT.
Analytics use
Connect each analytic to a response workflow and test it under representative site conditions.
Privacy and evidence
Document viewing rights, exports, retention, audit history and applicable organizational policy.
Lifecycle support
Track model status, firmware, VMS compatibility, licenses, warranties and replacement options.
Compare proposals on the same evidence
Product names and device counts do not make competing proposals equivalent. Ask each bidder to identify assumptions, exclusions, supported versions, owner responsibilities and the proof that will be delivered at acceptance.
| Comparison area | Evidence a complete proposal should provide |
|---|---|
| Fit for the operating need | A written explanation of how Video Surveillance Manufacturers and Product Guides supports the required users, events and workflows. |
| Compatibility | A supported-parts, software, license and integration matrix tied to the proposed architecture. |
| Infrastructure | Documented power, network, pathways, environmental and owner-furnished dependencies. |
| Acceptance | Named tests, expected results, exception handling and responsibility for correcting deficiencies. |
| Lifecycle | Current support status, update approach, warranty, subscriptions, spares and replacement planning. |
Deployment and acceptance sequence
- Discovery: agree on users, operating outcomes, retained systems, constraints and acceptance criteria.
- Field validation: verify dimensions, infrastructure, environmental conditions, pathways, power, network and integration points.
- Documented design: name the architecture, supported components, licenses, responsibilities, assumptions and change process.
- Staging and implementation: prepare configuration, backups, labels and test scripts before controlled field deployment.
- Operational acceptance: exercise normal use, exceptions, outages and recovery; then deliver training and system records.
Software, firmware and lifecycle responsibility
Record the installed model, hardware revision, software or firmware release, license or subscription, warranty and administrator ownership at handoff. Those details make later troubleshooting and upgrade planning materially safer.
Downloads, release notes, advisories and manuals should come from the manufacturer’s official portal. 360 Technology Group links to official resources and does not host firmware files locally. Some portals require an authorized customer, dealer or support entitlement.
Before any update, confirm the exact model and region, prerequisites, supported intermediate releases, backup, maintenance window, integration compatibility, rollback limits and post-update test plan. Cloud-managed products may control release timing differently from locally managed systems.
Build a project-specific comparison
Share the facility type, Carolina location, existing platform, approximate device count, operating problem, required integrations and target schedule. 360 Technology Group can use that context to determine whether Video Surveillance Manufacturers and Product Guides deserves a detailed site and design review.
IP security camera installation, step by step
An IP security camera installation is a network job as much as a mounting job. Each camera is a small computer on your network with an address, drawing power over the same cable that carries its video. Treated properly that is a large improvement; treated carelessly it is how a camera becomes the weakest device on a business network.
How we run one:
- Survey first. What each camera is for, at what distance, in what light. Pixels per foot at the target decides whether an image identifies a person or merely proves one existed.
- Cable and power. Cat6 to each device, terminated and tested, with results recorded. A PoE switch with enough total wattage — not just enough ports, which is the failure that makes cameras reboot at night when the infrared comes on.
- A separate VLAN. Cameras belong on their own network segment, away from workstations and card payments. Free if decided at the start.
- Recording and retention. Fourteen days suits most incidents; thirty to ninety where insurance or licensing requires it, which roughly doubles storage.
- Commissioning and handover. Focus, exposure and analytics set on site, plus logins that belong to you and documentation you keep.
IP camera installation across the Charlotte metro and the Carolinas — new systems, expansions, and repair or takeover of existing installations.