Authorized dealer · Certified installers · Charlotte, NC headquarters
360 Technology Group is an authorized Axis Communications dealer and certified installer
We have been selling, installing, programming and servicing Axis Communications systems across North and South Carolina since 2018 — more than 8 years. Our scope covers Axis network cameras and analytics, Axis network door stations and intercoms, access control and network audio.
- Authorized Axis Communications dealer — we quote and supply genuine Axis Communications equipment, licensing and subscriptions.
- Certified Axis Communications installers — our technicians install, wire, program, commission and document the system.
- Repair and takeover — we service, troubleshoot, expand and take over existing Axis Communications installations we did not originally install.
- 24/7 emergency service — on-call service technicians for emergency repairs, plus scheduled preventive maintenance.
We cover every city in North Carolina and South Carolina from our Charlotte headquarters. Request a quote or service call Call 704-726-4254
Axis Communications equipment we supply and install
Axis invented the network camera and still sets the reference for open standards — ONVIF, and a device platform that will talk to almost any VMS rather than locking you into one. That matters most on projects that will outlive the current head-end. We install and service Axis cameras, door stations, intercoms and audio across the Carolinas.
AXIS M3085-V Dome
Compact fixed indoor dome for offices, classrooms and corridors. Vandal-resistant and quick to install, which keeps labor down when the count is high.
AXIS M3086-V Dome
The higher-resolution version of the same body — use it where the same mounting position has to cover more width or produce more detail.
AXIS M3215-LVE Dome
Outdoor-rated dome with IR. The general-purpose exterior camera for entrances, walkways and building perimeters.
AXIS M4318-PLVE Panoramic
Panoramic multidirectional coverage from one mount and one cable. Cheaper to install than the three cameras it replaces.
AXIS A8207-VE Mk II Door Station
Network video door station combining intercom, camera and card reader at one opening — a single device instead of three, and one cable instead of three.
AXIS I8116-E Video Intercom
Network video intercom for main entrances where visitors need to be seen and spoken to before the door releases.
AXIS A1210 Door Controller
Network door controller that sits at the opening rather than in a distant closet, so a door needs a network drop instead of a home run of reader cable.
AXIS C1310-E Mk II Horn Speaker
Network horn speaker for live or scheduled announcements and automated audio deterrence — a voice telling someone they are on camera stops far more incidents than a recording of it afterwards.
Axis devices are ONVIF-conformant and work with Milestone XProtect, Avigilon Unity and most other major platforms, as well as Axis Camera Station. That openness is the reason to choose Axis on a project you expect to keep for a decade. See camera installation and pricing.
Product images are supplied by the manufacturer. 360 Technology Group is an authorized Axis Communications dealer and certified installer. Models, finishes and availability change — the proposal names the exact part numbers for your project.
North Carolina and South Carolina planning guide
Axis
Selecting Axis is an architecture decision as much as a purchasing decision. A complete scope explains what is being solved, what must integrate, how failure is handled and who owns the system after handoff.
Start with the decision, not the catalog
360 Technology Group evaluates Axis as part of a complete video-surveillance and evidence-management system. The recommendation should follow a field-verified problem statement, not a presumption that every published feature belongs in the project.
Discovery documents the current equipment, affected users, desired workflows, required integrations, security and privacy expectations, project constraints and measurable acceptance criteria. That evidence creates a fair basis for comparing reuse, migration and replacement.
For Carolina facilities, the scope should also account for occupied work areas, weather exposure, lightning and surge conditions, local construction coordination, network readiness, service access and the owner’s long-term administration model.
Detailed product and planning guides
Each card below opens a published guide with deeper product-family, design or implementation information.
Axis Intercom, Access Control and Network Audio
Open the detailed product, design or implementation guide.
Axis Network Cameras, Analytics and Recording
Open the detailed product, design or implementation guide.
Capabilities and selection checkpoints
The cards in this section summarize information to evaluate; they are not separate pages. Availability and compatibility can change, so final models and releases must be confirmed against current manufacturer resources.
Axis Security Cameras
Compare retained equipment, migration effort, subscription impact and replacement options for this topic.
Axis Cameras
Review compatibility, capacity, infrastructure and lifecycle implications with the complete system design.
Axis Security Camera Software
Document who configures, tests, administers and supports this function after the project is accepted.
Axis 360 Camera
Review compatibility, capacity, infrastructure and lifecycle implications with the complete system design.
Axis PTZ Camera
Document who configures, tests, administers and supports this function after the project is accepted.
Who Should Use Axis Cameras?
Confirm which current models, editions, licenses and dependencies support this requirement before procurement.
Image objective
Document who configures, tests, administers and supports this function after the project is accepted.
Recording architecture
Treat this as a design checkpoint; the final selection depends on field conditions and supported releases.
Network design
Treat this as a design checkpoint; the final selection depends on field conditions and supported releases.
Analytics use
Treat this as a design checkpoint; the final selection depends on field conditions and supported releases.
Privacy and evidence
Confirm which current models, editions, licenses and dependencies support this requirement before procurement.
Lifecycle support
Document who configures, tests, administers and supports this function after the project is accepted.
Evidence to collect before design
A useful survey and stakeholder review should produce the following project evidence for Axis:
- Scene objectives for every camera, including identification detail, direction of travel and operating hours.
- Day, night, backlight, glare, weather, vibration, privacy and mounting conditions at each location.
- Retention period, recording mode, resolution, frame rate, failover and export requirements.
- PoE load, switching, uplinks, bandwidth, storage, remote access and network-security constraints.
- VMS, analytics, access control, alarm, intercom and third-party integration expectations.
- User permissions, evidence handling, health monitoring, software support and replacement planning.
Architecture and integration review
Image objective
Specify the event and visual detail the camera must capture instead of selecting resolution in isolation.
Recording architecture
Calculate storage, retention, failover and export needs for the complete camera count.
Network design
Validate PoE, bandwidth, segmentation, time services, remote access and monitoring with IT.
Analytics use
Connect each analytic to a response workflow and test it under representative site conditions.
Privacy and evidence
Document viewing rights, exports, retention, audit history and applicable organizational policy.
Lifecycle support
Track model status, firmware, VMS compatibility, licenses, warranties and replacement options.
Compare proposals on the same evidence
Product names and device counts do not make competing proposals equivalent. Ask each bidder to identify assumptions, exclusions, supported versions, owner responsibilities and the proof that will be delivered at acceptance.
| Comparison area | Evidence a complete proposal should provide |
|---|---|
| Fit for the operating need | A written explanation of how Axis supports the required users, events and workflows. |
| Compatibility | A supported-parts, software, license and integration matrix tied to the proposed architecture. |
| Infrastructure | Documented power, network, pathways, environmental and owner-furnished dependencies. |
| Acceptance | Named tests, expected results, exception handling and responsibility for correcting deficiencies. |
| Lifecycle | Current support status, update approach, warranty, subscriptions, spares and replacement planning. |
Deployment and acceptance sequence
- Discovery: agree on users, operating outcomes, retained systems, constraints and acceptance criteria.
- Field validation: verify dimensions, infrastructure, environmental conditions, pathways, power, network and integration points.
- Documented design: name the architecture, supported components, licenses, responsibilities, assumptions and change process.
- Staging and implementation: prepare configuration, backups, labels and test scripts before controlled field deployment.
- Operational acceptance: exercise normal use, exceptions, outages and recovery; then deliver training and system records.
Software, firmware and lifecycle responsibility
Record the installed model, hardware revision, software or firmware release, license or subscription, warranty and administrator ownership at handoff. Those details make later troubleshooting and upgrade planning materially safer.
Downloads, release notes, advisories and manuals should come from the manufacturer’s official portal. 360 Technology Group links to official resources and does not host firmware files locally. Some portals require an authorized customer, dealer or support entitlement.
Before any update, confirm the exact model and region, prerequisites, supported intermediate releases, backup, maintenance window, integration compatibility, rollback limits and post-update test plan. Cloud-managed products may control release timing differently from locally managed systems.
Build a project-specific comparison
Share the facility type, Carolina location, existing platform, approximate device count, operating problem, required integrations and target schedule. 360 Technology Group can use that context to determine whether Axis deserves a detailed site and design review.
Official Axis software, firmware and support
Use these manufacturer-owned portals for current downloads, release notes, manuals, advisories and technical resources. 360 Technology Group links to official sources and does not copy or host firmware files.
Update carefully: confirm the exact model, region, hardware revision, installed version, prerequisites, required intermediate releases, support entitlement, integrations, backup, maintenance window, rollback limitations and post-update tests. The wrong package or sequence can interrupt service or prevent a downgrade.
Some portals require a customer, dealer, certified-technician or active-support login. Cloud-managed products may update automatically and may not offer a public firmware file.